Pages

This is default featured slide 1 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 2 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 3 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 4 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 5 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

Friday, January 6, 2012

Fixing Catrid Canon

Because many are googling the issue of canon catrid this time I will discuss various ways to test and fix where catrid 810/811.

Immediately, first of all you must understand that catrid canon that there are 3 parts:

1. INK tanks

2. Cip / conector

3. Head.

Ink tank which is a temporary storage place before the ink used to print, Cip / connector is used for detection on the mainboard of your printer, Head of section for removing the ink which will form the text or images.

To note again that Cip / conector is no period so its use can not be used.

his time about 3-4 months alone, more than it already durable category. but do not worry much until the 1th of my custumer more chips / conector still hale and hearty.

Head and continue not to be scratched. This head has to be considered very sensitive because he has a hole that size, mickro and if scratched it will be an impact on your printout.

Let's discuss the Test, catrid you if the results are ugly.

How to check this catrid actually very easy to open and close your printer casing

then remove your catrid. test is very easy to use wipes

tissue paste it into the printer head you should not be scratched in the paste enough alone.

# If the ink wipes out perfectly and made ​​a nice print category OKAY

# If the wipes the ink does not come out perfectly and produced less fine print means there are 2 possibilities.

              1. Fill ink tank empty / fullness (the ink in the ink tank can not be less and should not be many)

              2. Cip / conector off. solutions must replace new catrid.

how to refill canon catrid

Now I will discuss how to refill canon Catrid

would anyone know the price of canon catrid less affordable so that people would prefer catrid recharge them if it was gone because it is more economical than buying a new catrid.

and again many people do not understand about this catrid into the ink charging, so they prefer to fill the refil center. that the filling is definitely free of charge.

and this time I try to share knowledge to everyone who needs this catrid merefil way.

 
1. catrid bin has a limit of ink:

                             Black: 5-6 ml

                             Color: 2-3 ml / color

2. not to charge too much because catrid can not accommodate too much ink already filled in too much suction to turn back.

3. after filling the catrid kibas-flick. (Not too hard)

after the refil ink that goes into catrid will be retained by sponges that are in cartid, and to treat rapid fall of the ink to the Head catrid way is to shake it.

4. If the way of the No. 3 still can not catid your chance to overcome that impasse

prepare a tissue and cleaning fluid head. wet wipes with a fluid head and stick to the surface of the printer head wait a while until the ink in the head well back.

5.
Do not enter the wrong colors on your 811 Color catrid this layout charging the correct color. holes left part The Right Blue Yellow and Red Top

if there are further problems regarding your canon clay catrid my previous entry Click here